The following alerts are based on the data in the tables below. An absence of an alert does not imply the substance has no implications for human health, biodiversity or the environment but just that we do not have the data to form a judgement. These hazard alerts do not take account of usage patterns or exposure, thus do not represent risk.
Environmental fate
Ecotoxicity
Human health
 
 
Human health High alert: Neurotoxicant
Warning: Significant data are missing
GENERAL INFORMATION
Description
A veterinary sedative, anesthetic adjunct and analgesia
GB regulatory status
GB COPR regulatory status
Not applicable
Date COPR inclusion expires
Not applicable
GB LERAP status
Not applicable
EC Regulation 1107/2009 (repealing 91/414)
EC Regulation 1107/2009 status
Not applicable
Dossier rapporteur/co-rapporteur
Not applicable
Date EC 1107/2009 inclusion expires
Not applicable
EU Candidate for substitution (CfS)
Not applicable
Listed in EU database
No
Approved for use (✓) under EC 1107/2009 in the following EU Member States
ATAustria
BEBelgium
BGBulgaria
CYCyprus
CZCzech Republic
DEGermany
DKDenmark
EEEstonia
ELGreece
 
 
 
 
 
 
 
 
 
ESSpain
FIFinland
FRFrance
HRCroatia
HUHungary
IEIreland
ITItaly
LTLithuania
LULuxembourg
 
 
 
 
 
 
 
 
 
LVLatvia
MTMalta
NLNetherlands
PLPoland
PTPortugal
RORomania
SESweden
SISlovenia
SKSlovakia
 
 
 
 
 
 
 
 
 
Approved for use (✓) under EC 1107/2009 by Mutual Recognition of Authorisation and/or national regulations in the following EEA countries
1980s, first synthesised; 1990s, first vet use; 2000s, global expansion
Example manufacturers & suppliers of products using this active now or historically
CP Pharma Handelsgesellschaft mbH
Vetpharma Animal Health S.L.
Example products using this active
Cepadex Solution for Injection
Hipnoton Solution for Injection
Somnipron Solution for Injection
Formulation and application details
Usually supplied as solution for injection
Commercial production
The production of detomidine hydrochloride involves a two-step synthetic process starting from key aromatic and heterocyclic precursors. First, (2,3-dimethylphenyl)magnesium bromide undergoes an addition reaction with formaldehyde-substituted 1H-imidazole, forming the intermediate compound (2,3-dimethylphenyl)(1H-imidazol-4-yl)methanol. This intermediate is then subjected to a reduction reaction in the presence of isopropanol and concentrated hydrochloric acid, which facilitates the conversion into detomidine hydrochloride.
Impact on climate of production and use
Published GHG data is not available for most pharmaceuticals. However, according to industry, global averages suggest producing 1 kg of a typical active pharmaceutical ingredient can range from 10 to 100 kg CO₂e for small molecule drugs and potentially up to 1000 kg CO₂e for complex biologicals such as vaccines, depending on the drug type, its formulation, complexity of synthesis, solvent recovery, and energy sources used.
ENVIRONMENTAL FATE
Property
Value
Source; quality score; and other information
Interpretation
Solubility - In water at 20 °C (mg l⁻¹)
-
-
-
Solubility - In organic solvents at 20 °C (mg l⁻¹)
-
-
-
Melting point (°C)
-
-
-
Boiling point (°C)
-
-
-
Degradation point (°C)
-
-
-
Flashpoint (°C)
-
-
-
Octanol-water partition coefficient at pH 7, 20 °C
P
-
-
-
Log P
-
-
-
Fat solubility of residues
Solubility
-
-
-
Data type
-
-
-
Density (g ml⁻¹)
-
-
-
Dissociation constant pKa) at 25 °C
-
-
-
-
Vapour pressure at 20 °C (mPa)
-
-
-
Henry's law constant at 25 °C (Pa m³ mol⁻¹)
-
-
-
Volatilisation as max % of applied dose lost
From plant surface
-
-
-
From soil surface
-
-
-
Maximum UV-vis absorption L mol⁻¹ cm⁻¹
-
-
-
Surface tension (mN m⁻¹)
-
-
-
Degradation
Property
Value
Source; quality score; and other information
Interpretation
General biodegradability
-
Soil degradation (days) (aerobic)
DT₅₀ (typical)
-
-
-
DT₅₀ (lab at 20 °C)
-
-
-
DT₅₀ (field)
-
-
-
DT₉₀ (lab at 20 °C)
-
-
-
DT₉₀ (field)
-
-
-
DT₅₀ modelling endpoint
-
-
-
Note
-
Dissipation rate RL₅₀ (days) on plant matrix
Value
-
-
-
Note
-
Dissipation rate RL₅₀ (days) on and in plant matrix
Value
-
-
-
Note
-
Aqueous photolysis DT₅₀ (days) at pH 7
Value
-
-
-
Note
-
Aqueous hydrolysis DT₅₀ (days) at 20 °C and pH 7
Value
-
-
-
Note
-
Water-sediment DT₅₀ (days)
-
-
-
Water phase only DT₅₀ (days)
-
-
-
Sediment phase only DT₅₀ (days)
-
-
-
Air degradation
As this parameter is not normally measured directly, a surrogate measure is used: ‘Photochemical oxidative DT₅₀’. Where data is available, this can be found in the Fate Indices section below.
Decay in stored produce DT₅₀
-
Soil adsorption and mobility
Property
Value
Source; quality score; and other information
Interpretation
Linear
Kd (mL g⁻¹)
-
-
-
Koc (mL g⁻¹)
-
Notes and range
-
Freundlich
Kf (mL g⁻¹)
-
-
-
Kfoc (mL g⁻¹)
-
1/n
-
Notes and range
-
pH sensitivity
-
Fate indices
Property
Value
Source; quality score; and other information
Interpretation
GUS leaching potential index
-
-
-
SCI-GROW groundwater index (μg l⁻¹) for a 1 kg ha⁻¹ or 1 l ha⁻¹ application rate
Value
Cannot be calculated
-
-
Note
-
Potential for particle bound transport index
-
-
-
Potential for loss via drain flow
-
-
-
Photochemical oxidative DT₅₀ (hrs) as indicator of long-range air transport risk
Lewis, K.A., Tzilivakis, J., Warner, D. and Green, A. (2016) An international database for pesticide risk assessments and management. Human and Ecological Risk Assessment: An International Journal, 22(4), 1050-1064. DOI: 10.1080/10807039.2015.1133242